This Slipfence Store is available for shipping to the United States. For shipping to Canada, click here for online buying options.

Slipfence Store

8 ft. Post with Cap
  • 8 ft. Post with Cap
  • These posts are used for all Slipfence residential systems. 3" x 3" x 8' 4" powder coated black for outdoor use in all climates.
  • VERTICAL
  • HORIZONTAL
  • TRADITIONAL
  • $59.99 each

9 ft. Post with Cap
  • 9 ft. Post with Cap
  • These posts are used for all Slipfence residential systems. 3" x 3" x 9' 4" powder coated black for outdoor use in all climates.
  • VERTICAL
  • HORIZONTAL
  • TRADITIONAL
  • $64.99 each

10 ft. Post with Cap
  • 10 ft. Post with Cap
  • These posts are used for all Slipfence residential systems. 3" x 3" x 10' 4" powder coated black for outdoor use in all climates.
  • VERTICAL
  • HORIZONTAL
  • TRADITIONAL
  • $69.99 each

12 ft. Post with Cap
  • 12 ft. Post with Cap
  • These posts are used for all Slipfence residential systems. 3" x 3" x 12' 4" powder coated black for outdoor use in all climates.
  • VERTICAL
  • HORIZONTAL
  • TRADITIONAL
  • $99.99 each

Vertical Stringer Kit
  • Vertical Stringer Kit
  • Stringers, (often called "Rails"), are the upper and lower rails for the Slipfence vertical fencing system. Included are; 2- stringers, (upper and lower), 4 brackets, 4 nuts and bolts, 10 self drilling screws and 100 wood screws. Just fasten these rails with brackets and stainless hardware included to Slipfence posts and slip in regular fence boards.
  • VERTICAL
  • $110.00 each

Cap Rail for top of Vertical Slipfence panel
  • Cap Rail for top of Vertical Slipfence panel
  • This is the nice top black cap rail that sits snug on top of the wood pickets in a vertical Slipfence panel. This is not structural, it is only to finish off the top of the fence panel to match the upper and lower stringers. Also protects tops of wood pickets from rotting. This cap rail can also be used atop a traditional shadowbox style wood fence provided that the boards are 5/8" width and 2 x 4's are used as rails.
  • VERTICAL
  • TRADITIONAL
  • $34.99 each

Horizontal Channel Kit for 6 ft. high fence
  • Horizontal Channel Kit for 6 ft. high fence
  • These are the channels that get attached to the Slipfence Aluminum posts to slide boards down into creating a nice horizontal fence system. 2 channels per kit and includes self drilling screws and wood screws. Powder coated for outdoor use in all climates. 70" Long for a 6' high fence
  • HORIZONTAL
  • $54.99 each

Horizontal Channel Kits for 7 ft high fence
  • Horizontal Channel Kits for 7 ft high fence
  • These are the channels that get attached to the Slipfence Aluminum posts to slide boards down into creating a nice horizontal fence system. 2 channels per kit and includes self drilling screws and wood screws. Powder coated for outdoor use in all climates. 81" Long for a 7' high fence
  • HORIZONTAL
  • $69.99 each

Horizontal Channel Kit for 8 ft. high fence
  • Horizontal Channel Kit for 8 ft. high fence
  • These are the channels that get attached to the Slipfence Aluminum posts to slide boards down into creating a nice horizontal fence system. 2 channels per kit and includes self drilling screws and wood screws. Powder coated for outdoor use in all climates. 91" Long for an 8' high fence
  • HORIZONTAL
  • $79.99 each

Cap Rail for top of Horizontal Slipfence panel
  • Cap Rail for top of Horizontal Slipfence panel
  • This is the nice top black cap rail that fits snug on top of the top board in a Horizontal Slipfence panel. This is not structural, it is to finish off the top of the fence panel to match side channels. 84" Long so can be cut to exact width of each fence panel and fits snuggly inside the side channels.
  • HORIZONTAL
  • $24.50 each

Aluminum Traditional Bracket to fasten 2 in. x 4 in. wood rail to aluminum Fence Posts
  • Aluminum Traditional Bracket to fasten 2 in. x 4 in. wood rail to aluminum Fence Posts
  • These brackets are packed 2 per kit with screws and are to be fastened to the Slipfence aluminum post with the stainless self drilling screws included. The brackets provide a cradle for a 2 x 4 or 2 x 6 to be used as top, bottom , and middle rails for a traditional vertical board wood fence. For a horizontal traditional fence you can bend the bottom flange on these brackets down and slip in a 2 x 4 vertically against the post, then clad the front side with boards horizontally using deck screws.
  • VERTICAL
  • TRADITIONAL
  • $11.99 each

Gate Kit
  • Gate Kit
  • This kit is not a gate. It includes the following items to construct either a vertical or horizontal gate on site: 6 - L brackets to construct a gate frame our of 2 x 4 wood. 1 - Thumb Latch that can be locked from the inside and accessed from both sides. 1 - Pair of adjustable gate hinges. 1 - Roll of 1.5" black rubber strapping to emulate the stringers in a vertical system or the channels in a horizontal system. 1 - pack of 100 wood screws to attach rubber strapping to wood as seen in video. 1 - pack of 100 stainless wood screws to attach fence boards or deck boards to gate frame
  • VERTICAL
  • HORIZONTAL
  • TRADITIONAL
  • $99.00 each
  • OUT OF STOCK

6 ft. Post with base plate
  • 6 ft. Post with base plate
  • This post is 3" x 3" x 76" Long, (includes cap), to accommodate a 6' high fence built on top of concrete. There is a 6" x 6" x 1/4" thick aluminum plate with 4 anchor holes welded to the bottom of this post. Anchors are not included in this kit and must be purchased separately in accordance with regional code regulations and substrate that the post will be mounted to.
  • VERTICAL
  • HORIZONTAL
  • TRADITIONAL
  • $80.00 each

Angle Wedges for vertical system 4 pcs. per pack
  • Angle Wedges for vertical system 4 pcs. per pack
  • These plastic angle wedges are 22.5 degree wedges to be set behind the Vertical brackets for a fence section that is not a perfect 90 degree corner. Longer stainless self drilling screws are included to drill through the wedge and into the post. For a 45 degree angle, 2 wedges can be glued together and stacked prior to installation,
  • TRADITIONAL
  • $19.99 each

Wood Screws 1000s pcs
  • Wood Screws 1000s pcs
  • These are the Wood screws used for all Slipfence systems. These screws fasten the inserted wood or composite boards to the channels, rails, stringers or cap rails. Constructed of 18-8 Stainless steel and magni coated black for long lasting colour outdoors and no rusting nor corrosion.
  • VERTICAL
  • HORIZONTAL
  • TRADITIONAL
  • $42.00 each
  • OUT OF STOCK

Extra Bracket Kit for Vertical Slipfence
  • VERTICAL
  • $24.99 each

100 pcs wood screws
  • 100 pcs wood screws
  • These are the Wood screws used for all Slipfence systems. These screws fasten the inserted wood or composite boards to the channels, rails, stringers or cap rails. Constructed of 18-8 Stainless steel and magni coated black for long lasting colour outdoors and no rusting nor corrosion.
  • VERTICAL
  • HORIZONTAL
  • TRADITIONAL
  • $5.00 each

3 in. x 3 in. Post Cap
  • 3 in. x 3 in. Post Cap
  • This is the same cap that gets packed inside of each post prior to shipping. 3" x 3" Aluminum post cap coated for outdoor use in all climates. Simply tap onto top of post with rubber mallet as they self tighten onto post.
  • VERTICAL
  • HORIZONTAL
  • TRADITIONAL
  • $5.00 each

  • 6 ft. Angle Wedge for 6 ft. high horizontal system
  • These plastic angle wedges are 22.5 degree wedges to be set behind the Horizontal Channels for a fence section that is not a perfect 90 degree corner. Longer stainless self drilling screws are included to drill through the wedge and into the post. For a 45 degree angle, 2 wedges can be glued together and stacked prior to installation,
  • $39.99 each
Retailers
  • Vertical Fence
  • The Slipfence Vertical Fence System combines Aluminum posts and stringers with regular wood Fence boards.

  • More Information
  • Horizontal Fence
  • The Slipfence HORIZONTAL Fence System combines Aluminum posts and Channels with regular wood DECK boards.

  • More Information
  • Traditional Fence
  • The Slipfence Traditional Fence System combines Aluminum posts with 2x4 rails and regular wood fence boards.

  • More Information
  • Gate Kits
  • The Slipfence Gate Kit provides all the necessary hardware to make a gate for either the Vertical and Horizontal Slipfence.

  • More Information